Non-geared models assume overhung load located at 0.625” (15.88mm) from face of motor.
Geared models assume overhung load located at 1” (25.40mm) from face of motor.
These motors must be operated with sufficient load to prevent speed from exceeding maximum allowable speed, 65% of free speed as shown on performance curve.
General:
Air Inlet: 3/4” NPTF
All tools performance rated @ 90psi (620 kPa) air pressure.Notet:
Fill the motor to the proper level before operating. Use engine oil API Service Classified “SC” in the following weights:
Above 32° F: SAE 30W
PBelow 32° F: SAE 10W
